Branch Saddles

Branch-Saddle-Product-Banner

GFCP Electrofusion Branch Saddles are designed and manufactured in accordance with ASTM F-1055 for use with pipe conforming to ASTM D2513/3035, F-714 and with Butt fittings conforming to ASTM D3261 as applicable.

PE2406/2708 Electrofusion Branch Saddles are produced from a pre-blended virgin resin that has a PPI listing of PE2406/2708 which complies with ASTM D3350. 

PE3408/4710 Electrofusion Branch Saddles are produced from a pre-blended virgin resin that has a PPI listing of PE3408 which complies with ASTM D3350. This resin carries a NSF Standard 61 listing for use with potable water.

See our catalog for specific base size, and pressure ratings for each Branch Saddle style.

NOTE: base sizes 8" and above are not fully pressure rated.


EF Branch Saddle With 1 1/4" - 2" Outlet & 2" - 12" Base


EF Branch Saddle With 4" Outlet With 4" - 6" Base

SADDLE-EF_BRANCH-SADDLES_4_-OUTLET

4" Outlet

4" - 6" Base


EF Full Pressure Branch Saddle - Top Load

SADDLE-BT-TOPLOAD-TEE-W_ROUND-BASE-AND-BUTT-OUTLET

Main Sizes: 8" X 6" - 48" X 8" IPS/DIPS.


EF Full Pressure Branch Saddles

SADDLE-EF_BRANCH-SADDLES_FULL-PRESSURE_4_-OUTLET

Main Sizes: 8" X 4" IPS - 12" X 8" IPS.


EF Low Pressure Branch Saddle

SADDLE-EF_BRANCH-SADDLES_6_-&-8_-LOW-PRESSURE-BRANCH-SADDLE

Main Sizes: 8" X 6" - 48" X 8" IPS/DIPS.

Restricted pressure rating limited to 50 psi.

See our catalog for specific base size, and pressure ratings for each Branch Saddle style.